ACL 6500 Staticide ESD Spray
ESD FLOOR CLEANER
4100 Staticide Restorer Cleaner
: Sweep floor with untreated,
dry mop. Dilute Restorer Cleaner 10:1 (10
parts water to 1 part concentrate). Using a
clean rayon mop, apply a thin coat of
mixed solution to the floor by fully saturating
mop and then wringing out excess
cleaner, so that the floor is not over saturated
with moisture. Remove soiled solution.
Allow floor to dry one hour before resuming traffic.
For auto scrubbers, gently scrub diluted
solution with clean polishing pad (white).
Use 1,500 - 2,000 RPM with light pressure
setting to prevent removal of finish.
Check resistivity and apply a second treatment
if necessary. Consult floor finish application
procedure for details and
ACL 8691 Solder Mask
ACL 6300 Staticide ESD Safety Shield
Anti-Static Aerosol Formula
The 6500 formula, like the 6300, is designed for applications on common plastics such as acrylic, PET, PETG, PVC, and polycarbonate, but it is available in an economical aerosol container. A light spray application is sufficient for excellent electrical performance. Coating cures at ambient temperature. Intended for indoor use, this product is ideal for plastic parts, bins, and shelving. Our tests show electricals will last at least two years.
Surface resistance of 10e6 to 10e9 ohms
Translucent without appearing Ã¢milkyÃ¢
The StaticideÃ® ESD Safety Shield coatings are made of a proprietary blend of conducting polymers which allows the coating to be inherently dissipative regardless of ambient relative humidity. Unlike surfactants, this Pedot formulation provides dependable protection by allowing static to dissipate safely without wearing off or losing resistivity.
Surface resistivity of 106 to 109 ohms/sq, Water-based acrylic.
Translucent without appearing Ã¢milkyÃ¢
Adheres to a variety of plastics without chipping or peeling
Meets ANSI/ESD S20.20 for static dissipation
Can be applied via flow coat, dipping, foam brush, or spray. Ambient cure.
ACL 4800 Staticide ULTRA ll (Floor Wax) ( Dissipative Floor Products)
ACL Static Dissipative Floor Products
ACL Acrylic Conformal Coating 8690
ACL 8625 Staticide IPA
ACL Plastic & Glass Cleaner 8670
ACL 4020 / 4030 (ESD FLOOR CLEANER) Staticide Neutral Cleaner
For normal surface cleaning of floors, first
sweep floor to remove surface dirt. Then
mop floor with one of the Neutral Cleaner
solutions. Allow to air dry before resuming foot traffic.
ACL 2005 Staticide Topical Anti-Static Protection, Heavy -Duty, 1 Quart
Color: Very slight amber/clear
Container Size: 1 Quart Spray Bottle
Container Volume: 1 qt.
Mixing Ratio: 1:39
Odor: Slight Floral
Physical Form: Liquid
Size: 1 Quart Spray
ACL Staticide 2006 Static Sentry, Aerosol, 12 oz., White
Brand Name ACL Staticide
Item Volume 12 ounces
Item Weight 340.0 grams
Model Number 2006-each
Number of Items 2
Part Number 2006
ACL 6001, 6002 Mat & Table Top Cleaner.
ACL Mat & Table Top Cleaner is a multi-purpose static
dissipative rejuventating cleaner that is designed for
maintaining the surface resistivity of ESD mats. It is the
ideal cleaner for areas in which static-sensitive devices
are assembled, tested, and handled, but can also be used
in areas that require a mild but effective cleaner. This
non-abrasive formula cleans and restores dead spots that
have lost electrical characteristics. It is safe to use on the
workbench, table tops and anti-static mats, including rubber
Mat & Table Top Cleaner is a non-flammable cleaner that
leaves no film or streaks. It effectively removes flux
residues, oily finger marks, grease, nicotine, dirt, grime and
inorganic contaminants. It also removes dirt on chair mats
and other anti-static mats without degrading the surfaceâs
ACL 7001s Staticide Hi-Tech Hand Lotion
Moisture on skin is vital to wrist strap performance for
personal grounding. ACL Staticide® Hi Tech Hand Lotionâs
static dissipative formula moisturizes the skin
for better bonding between the skin and wrist strap
which is imperative in the electronics manufacturing
Enriched with natural moisturizers, including aloe
vera and vitamin E, Staticide® Hi Tech Hand Lotion
will encourage good skin health and softer hands.
Daily use of this hand lotion relieves and prevents dryness,
flaking and irritation caused by the constant use
of gloves and chemicals.
This non-acidic, greaseless formula comes in a clean
fresh scent or in fragrance-free. It contains no glycerin,
silicone, lanolin or mineral oil. It absorbs quickly
into the skin, providing good contact between the
skin and wrist strap, and will not contaminate work
surfaces, leaving your work area ESD safe.
ACL Staticide 2003 General Purpose Staticide
Color Very slight amber/clear
Approximate cloud point (F°) 30°F
Approximate solidification point (F°) +20°F
Solubility in water Complete
Dilution compatibility Water, hard or soft
Density, lbs/gal 8.3
Specific Gravity 25°C/40°C .98
pH (approximate) 7-8
Odor Slight floral
Taste slightly bitter
Surface tension-reducing power Superior
Applications Spray, dip, wipe, coat
Freeze-Thaw capacity excellent, no adverse effects
Shelf Life Indefinite
Temperature Stability Withstands up to 30 minutes @ 450°F
4600 Staticide Ultra Floor Finish
No other ESD floor finish can match Staticide® Ultra Floor Finish
for electrical properties, physical longevity, and gloss. This
urethane-enhanced formula features superior abrasion resistance
and durability, fortifying floors with a long-lasting protective
layer that is shiny and ESD-safe for 12 to 24 months.
By maximizing stripping cycles, companies can keep costs
down by eliminating annual labor fees and production shutdowns.
Staticide® Ultra Floor Finish is the perfect choice for any environment
where static control is required, such as electronic,
medical, and clean room manufacturing facilities. With an average
surface resistivity of 108 -109 ohms per square, Staticide®
Ultra Floor Finish fulfills ANSI/ESD S20.20 guidelines and is
suitable for sensitive device manufacturing.
This water-based formula is UL listed for slip resistance, RoHS
compliant, biodegradable, non-flammable, and free of
formaldehyde, phthalates, alkalis, acids, and ammonia.
ACL Staticide 8622 Flux Remover Lead Free
Powerful Flux Remover for High Temperature, Lead-Free Flux Removal.
12 oz. / 340 g Aerosol
ACL 8640 Staticide Turbo Blast
Turbo Blast Precision Duster is an economical,
high-precision duster with maximum blasting power
for electronic cleaning applications. Its exceptional
purity instantly rids surfaces of particulate contamination
without leaving residuals. This powerful duster is
engineered to remove dirt, dust, oxide particles, and
other airborne particles instantly and can be used to
facilitate the accelerated drying of solvent cleaners in a
variety of applications.
Ideal for the following applications:
â¢ Removing dirt, dust, and other dry contaminants
â¢ Accelerating dry time of solvents
â¢ Blow off of PCB during manufacture
â¢ Maintaining specialized electronic equipment including medical,
ACL 8604 Staticide Electronics Rinse VT
Electronics Rinse VT is the most economical, non-flammable, general purpose electronic component rinse. This high-pressure cleaning agent is excellent for removing grease, oil, and flux residues. Specially formulated with DuPont Vertrel, this lowodor and low-environmental impact aerosol will instantly evaporate without leaving a residue.
Cleaning action removes contaminants while restoring efficiency and maintaining instrument precision. Great for removing oxidized soils from printed circuit boards, switches, circuit breakers, motors and armatures.
Ideal for the following applications:
â¢ Printed circuit boards; electronics equipment; PLCâs.
â¢ Contacts and relays; circuit breakers; finger connectors; fuses.
â¢ Control systems; precision devises; stencils/screens.
â¢ Test/measurement devices; switches; fiber optic splices.