Rework Station ARO-853

About Rework Station ARO-853

1 ARO-853+ BGA rework station is 2 in 1 BGA rework equipment integrated with the preheating station and hot air gun. It is designed with the latest SMD technology, on the basis of the current market demand.

2 ARO-853+ is added with the 3 in 1 function of the soldering station. It occupies less area. This conventional machine is practical, powerful, and energy-saving. It can basically meet all applications.

3 The temperature control part masters the core technology. The air guns use SAMSUNG microchip PID control procedures to speed 100ms cycle of real-time tracking and real-time correction of the air gun outlet wind and soldering iron tip temperature. Therefore, there work station comes with high temperature stability. 

4 PID speed 100ms rapid temperature correction, high energy efficiency conversion at a constant temperature help lower the power consumption. This equipment saves more energy than the comparable machines.

5 ARO-853+ also uses the high temperature silicone cable which will not be damaged within30s when exposed to the soldering tips of 300 degrees. Its heating element is Hakko heater featured by high power and fast temperature compensation. This equipment is particularly suitable for de-soldering crude terminals, solder joints, and miscellaneous difficult solder
joints.

6 The rework station comes with the air gun handle safe protection. After connected to the power supply, it will not start the normal working until the handle has been placed on the airgun frame. If the handle is not put on the air gun frame, the main unit could not get the safety directs. The purpose is to effectively prevent the damage caused by the unknown circumstances that the air gun is placed in the areas of fire or other places.